[WinMac] Re: Printing to a Stylewriter 1200 from a PC


Dan Schwartz(expresso[at]snip.net)
Wed, 27 Jan 1999 07:47:36 -0500


        Dear Alex,

        You can get an LC-compatible ethernet card for your Mac LCII (not to be
confused with the H-P NetServer LCII !) that plugs in your Processor Direct
Slot (PDS). If you've already installed a DayStar accelerator, then you're
stuck with using a SCSI <--> Ethernet adapter.

        You can buy used PDS ethernet adapters for about $25 or so.

        Cheers!
        Dan

At 09:56 AM 1/27/99 +0000, you wrote:
>Hi everyone,
>
>the subject says it all: is it possible to print from a Windows 95/98 PC
>to a Stylewriter 1200? Presumably I could rig up a serial cable from the
>PC to the printer, but are there any drivers available?
>
>Also, is it possible to put ethernet on an Mac LCII?
>
>Many thanks,
>
>Alex
>--
>Alex Knight (aek4@york.ac.uk)
>
>Biology Department
>University of York
>Heslington, York Y01 5DD
>
>+44 1904 432829
>+44 1904 432860 (FAX)
>
>Molecular Motors Web Page:
>http://motility.york.ac.uk:85/
>
>Coiled coil prediction web page:
>http://www.york.ac.uk/depts/biol/units/coils/coilcoil.html

 -----------------------------------------------------------------

        <mailto:expresso@snip.net, Dan@Hemnet.com>
         
        ALTERNATE: <mailto:expresso@workmail.com>

                Webmaster for <http://www.faulknerstudios.com>

        **Your Corel Solution Partner**

                **Your UltraBac Solution Source**

 -----------------------------------------------------------------

* Windows-MacOS Cooperation List *
* FAQ: <http://www.darryl.com/winmacfaq/> *
* Archives: <http://www.darryl.com/winmac/> *
* Subscribe: <mailto:winmac-on@xerxes.frit.utexas.edu> *
* Subscribe Digest: <mailto:winmac-digest@xerxes.frit.utexas.edu> *
* Unsubscribe: <mailto:winmac-off@xerxes.frit.utexas.edu> *



This archive was generated by hypermail 2.0b2 on Wed Jan 27 1999 - 04:57:30 PST