RE: [WinMac] mac monitor adjustment
Jim Royal(jimr[at]Eicon.com)
Fri, 28 Aug 1998 10:14:23 -0400
Bill Chapman wrote:
> This is an apple 1710 monitor. I found the control panel for monitor
> and sounds, but haven't been able to find a control or anything about
> convergence. I have one control for colors, and one for resolution.
> Where should I look?
>
>
I have An AppleVision 1710 sitting right in front of me. When I call up the
Monitors and Sound control panel, I have a button labeled "Geometry." The
Convergence control is there.
If you aren't getting this, then there are two possibilities:
1) The Apple Displays software is not installed. Download the latest
Displays software from Apple's support site and install it.
2) The ADB cable from the monitor is not connected to the computer's ADB
port. Your keyboard and mouse must be connected to the monitor, and the
monitor must be plugged into the ADB port. If this is not the case, the
computer will not recognize the monitor correctly.
Let me know what the result is!
Jim Royal
Technical Publications
"Understanding is a three-edged sword"
* Windows-MacOS Cooperation List *
* FAQ: <http://www.darryl.com/winmacfaq/> *
* Archives: <http://www.darryl.com/winmac/> *
* Subscribe: <mailto:winmac-on@xerxes.frit.utexas.edu> *
* Subscribe Digest: <mailto:winmac-digest@xerxes.frit.utexas.edu> *
* Unsubscribe: <mailto:winmac-off@xerxes.frit.utexas.edu> *
This archive was generated by hypermail 2.0b2
on Fri Aug 28 1998 - 07:16:27 PDT
|