RE: [WinMac] Curious NT4 MacPrint problem

Subject: RE: [WinMac] Curious NT4 MacPrint problem
From: Peters J B (Brooks) CRBE ("Peters)
Date: Fri Feb 15 2002 - 08:54:11 EST

Although I haven't had cause to use it, I d'loaded a utility called "Duplexer Tool" which is intended to allow the end-user to set the duplex mode (half- or full-) and perhaps speed. I think it was an unsupported product, but it seemed to have worked for those discussing it back in 1999.

If you can't find it, I'll happily send it as an attachment.

Brooks Peters
Naval Surface Warfare Center, Carderock Division
Maneuvering and Control Department, Code 5600
9500 MacArthur Blvd.
West Bethesda, MD 20817-5700

Voice: (301) 227-1243
FAX: (301) 227-5442
email: PetersJB@nswccd.navy.mil

> ----------
> From: Romeyn Prescott
> Sent: Thursday, February 14, 2002 9:45 PM
> Subject: RE: [WinMac] Curious NT4 MacPrint problem
>
> That all sounds groovy, but how does one "hard code" a Mac's Ethernet speed?
>
> ...ROMeyn
>
> Somewhen around 3:49 PM -0500 2/14/02, a person believing themself to
> be Perbix, Michael scribbled:
> >Make sure that the switch port is not set to 100 full and the client to
> >autonegotiate (for the server or Mac). Doing so will cause a duplex
> >mismatch. The mac should be set in an Auto-negotiate port, and the server
> >should either be Auto-negotiate at both ends or locks the same at both ends.
> >We had a HUGE problem with the thruput of our servers until we caught that.
> >The server said it was 100 full, and the switch was locked at 100 full, but
> >in reality the server had a 10 0half connection, the mismatch in duplex
> >causes all kinds of wacky stuff.
> >
> > -Mike
> >
> >> -------------------------------------
> >> Michael Perbix
> >> Telecommunications Specialist
> >> Lower Merion School District
> >> (610) 645-1964 - Phone
> >> (610) 896-8224 - Fax
> >>
> >>
> >> -----Original Message-----
> >> From: Romeyn Prescott [SMTP:prescor@potsdam.edu]
> >> Sent: Thursday, February 14, 2002 3:42 PM
> >> To: winmac@iffy.com
> >> Subject: [WinMac] Curious NT4 MacPrint problem
> >>
> >> Hi all,
> >>
> >> I'm having a baffling problem the solution to which eludes me. I
> >> hope someone here can help.
> >>
> >> BACKGROUND: Our College has an NT 4 Print Server which, in addition
> >> to serving the PC users on campus also serves the Macs in our labs
> >> and Computer Classrooms. (I won't get into WHY, suffice to say it's
> >> necessary.)
> >>
> >> Our current server is an aging Dell server with a 10Mb NIC. (This is
> >> important later.) I have been prepping a new server to replace it: a
> >> Gateway 6400 also running NT 4 Server with SFM. The new server has a
> >> 10/100 NIC and is plugged into a 100Mb switch.
> >>
> >> A fair number of our lab Macs are original iMacs and B&W G3s. I have
> >> discovered that these Macs (also on 100Mb switches) can NOT print to
> >> this new server! This was driving me batty until a colleague
> >> suggested putting my test iMac on 10Mb. I did and everything
> >> worked!! I have tried all combination of this now with no success.
> >> I Put the new server on 10 and the Mac on 100. Nothing. I tried
> >> different ports, different switches, all to no avail. If the Mac is
> >> on 100, it will not print. And that seems to be the ONLY thing
> >> "wrong" with it! Its networking seems to be fine in all other
> >> respects, INCLUDING printing to other 10Mb NT4 print servers!!!
> >>
> >> The Macs are all running Mac OS 9.1. I even tried a clean install,
> >> checked for firmware updates, PRAM zap, etc... And we do NOT have
> >> spanning tree active on our network.
> >>
> >> Stumped,
> >> ...ROMeyn
> >> --
> >>
> >>
> >> signat-url: http://www2.potsdam.edu/dctm/prescor/signat-url.htm
> >> -
> >> What a signat-url is and why you should use one:
> >> http://www2.potsdam.edu/DCTM/prescor/signat-url_defined.htm
> > >
> > >
> > > *** Windows-MacintoshOS Cooperation List ***
> > > FAQ: http://www.darryl.com/winmacfaq/
> > > Archive: http://www.darryl.com/winmac/
> > >
> > > To unsubscribe, send mail to winmac-unsubscribe@iffy.com
> >
> >
> >*** Windows-MacintoshOS Cooperation List ***
> >FAQ: http://www.darryl.com/winmacfaq/
> >Archive: http://www.darryl.com/winmac/
> >
> >To unsubscribe, send mail to winmac-unsubscribe@iffy.com
>
>
> --
>
>
> signat-url: http://www2.potsdam.edu/dctm/prescor/signat-url.htm
> -
> What a signat-url is and why you should use one:
> http://www2.potsdam.edu/DCTM/prescor/signat-url_defined.htm
>
>
> *** Windows-MacintoshOS Cooperation List ***
> FAQ: http://www.darryl.com/winmacfaq/
> Archive: http://www.darryl.com/winmac/
>
> To unsubscribe, send mail to winmac-unsubscribe@iffy.com
>
>

*** Windows-MacintoshOS Cooperation List ***
FAQ: http://www.darryl.com/winmacfaq/
Archive: http://www.darryl.com/winmac/

To unsubscribe, send mail to winmac-unsubscribe@iffy.com

This archive was generated by hypermail 2b28 : Fri Feb 15 2002 - 08:55:30 EST