RE: [WinMac] Apple 166mhz PC Card-Use a mac modem....

Michael Rehbein(ROTORWASH[at]ldd.net)
Wed, 11 Nov 1998 16:39:24 -0600

>
>Easy to do. I use a US Robotics Sportster to dial up from either the W95
>environment on the 100Mhz Pentium Apple PC card or from the MacOS on my
>9500/120. The PC setup control panel is used to de/assign the modem to the
>PC comm port of choice. You assign it to use the PC side and deassign it to
>use the Mac side.
>
>Steve DeLance
>Siemens Medical Systems, Inc.

  Do you have to reinitialize the modem before dialing in. I have a
SupraFAXModem 288 and depending on which platform will use the modem, it
must sent the command which tells the modem which default to use, pc or mac.

  Just wondering how or if you had to deal with this using the Robotics modem.
      Regards- Mike

---------------+---------------
          ___ /^^[___ _ Mike Rehbein N0AGG ICQ# 4471401
         /|^+----+ |#___________// Gabby, the feathered co-pilot
       ( -+ |____| ______-----+/ Sikeston, Missouri USA
        ==_________--' \ rotorwash@ldd.net
          ~_|___|__ Think "Different" •

* Windows-MacOS Cooperation List *
* FAQ: <http://www.darryl.com/winmacfaq/> *
* Archives: <http://www.darryl.com/winmac/> *
* Subscribe: <mailto:winmac-on@xerxes.frit.utexas.edu> *
* Subscribe Digest: <mailto:winmac-digest@xerxes.frit.utexas.edu> *
* Unsubscribe: <mailto:winmac-off@xerxes.frit.utexas.edu> *

This archive was generated by hypermail 2.0b2 on Wed Nov 11 1998 - 14:52:10 PST